Treatex Hardwax Oil Ultra Clear 

Treatex Hardwax Oil Ultra is the next generation of Hardwax Oil, designed to enhance and protect the natural beauty of your interior timber surfaces. Hardwax Oil Ultra follows the success of existing formula benefits of being user friendly, easy to apply, and quick drying, whilst improving ease of application and the durability of the finish. 
The end result is a hard wearing, attractive finish in any situation including, floors, doors and kitchen worktops that is easy to maintain with Treatex’s maintenance products and is spot repairable if the surface is damaged. 
Treatex Hardwax Oil Ultra is also based on the Treatex formulation of sustainable raw materials such as Bees wax, Carnauba wax, Candilla wax, Linseed oil, Sunflower oil, Jojoba oil. It contains no biocides or preservatives. 
Comes in Flat Matt, Matt, Satin or Gloss sheen levels 
Has a warming effect on lighter coloured timbers 
No sanding required between coats 
Withstands high temperatures 
Very durable 
Easy to maintain with Treatex Wax Polish 
Spot repairable 
Slip resistance test BS 7976-2PTV. Suitable for domestic, commercial and wet areas. 
Complies with regulation DIN 68861-1B: Resistance to spills of water, wine, beer, coffee, tea, fizzy drinks etc 
Safe for use on children’s toys: DIN EN 71-3 
Meets with VOC emissions regulations 
Recommended for those with dust allergies; dirt and dust can be removed easily 
Contains no biocides, preservatives or carcinogens 
Slip resistance further increased with the addition of Treatex R12 Anti-Slip additive 
Easy to apply – buffed, brushed or rolled on 
Quick drying – usually dry within 3-6 hours – dry in 1 hour when buffed 
Low odour 
Water resistant 
Very durable – further strengthened with Treatex hardener 
Easy to clean with Treatex Floor Care or Treatex Spray on Floor and Surface Clean 
Food safe: BS EN 1186-3:2002 Overall migration in Aqueous stimulant by total immersion 
1L will cover approximately 20m² in one coat / 12m² in two coats depending on the timber and method of application. 
2.5L will cover approximately 50m² in one coat / 30m² in two coats depending on the timber and method of application. 
10L will cover approximately 200m² in one coat / 120m² in two coats depending in the timber and method of application. 
1L will cover approximately 3 doors in two coats depending on the timber and method of application. 
*Natural can be used as a top coat with Spruce Colour Tone to achieve a pure bright white (see: Hardwax Oil Natural). 
Sand 120-150 grit 
Apply a thin coat of ULTRA using a good quality roller 
Leave for 10 minutes 
Slow buff with a soft pad to remove excess 
Finish using a lint free cloth under the buffer 
Leave for 45 minutes to dry with good ventilation 
Apply the final coat with best quality microfibre roller 
Usually ready for use after 8 hours / Usually ready for furniture after 18 hours 
Sand 100-150 grit 
Apply the first coat using a good quality brush or roller 
First coat will usually be dry within 3-6 hours with good ventilation 
Apply the second coat using a good quality brush or roller 
Usually ready for use after 8 hours / Usually ready for furniture after 18 hours 
If Treatex Hardwax Oil is applied too thickly, drying time will be increased. To speed up drying time raise the room temperature and increase air flow by opening doors and windows, or using a fan. 
Treatex brushes and rollers are available. Alternatively, use a high qulaity micrfibre roller or good quality brush. Tightly wrap a plastic bag around wet rollers and brushes to stop them drying out between coats. Wet brushes and rollers can be cleaned using white spirit. If you are using hardener then wet rollers and brushes will dry even if they are wrapped in a plastic bag and it will not be possible to clean them. 
0.5L…………………….. £19.93 
1L………………………… £34.16 
2.5L…………………….. £84.56 
10L……………………… £326.71 
Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings